Stretchers accessories

Showing all 20 results

Carriage kit

Kit designed to facilitate the transport on the shoulders of any spinal board unloading the weight from the arms.Useful in situations of precarious balance (eg, during the ascent or descent of a stair) where you need to have your arms free to stabilize.It consists of 4 adjustable straps that can be connected to the spinal board through a lark’s foot, and two chest harnesses for rescuers.

Read more
Kars

ANTIROTATION SYSTEM FOR HELIRESCUE

K.A.R.S. (Kong Anti Rotation System)
A real revolution for helirescue world!
Kong is proud to present this innovative device that revolutionizes the way to make helirescue. No more anti-rotation cordolets, no more operators on the ground, maximum reliability and efficiency even in the most difficult situations.
Thanks to an ingenious electronic system able to detect the rotation of the stretcher suspended to the winch, the wing angle changes with instantaneous, rapid and precise movements, blocking immediately the rotation induced by the air flow generated by the rotors of the helicopter.
The KARS has a button for deactivate the wing, long-life rechargeable battery with charge indicator, warning lights that indicate the status of the device (hours of use, need for revision, etc…)
Equipped with quick release bracket for helirescue kit Kong mod. Everest; on request it is possible to mount it on any stretcher with a special connecting plate.
Patented.

Read more
Aquarius

Holding kit to fix the stretcher to the helicopter floor. It is made of four adjustable webbings fitted with quick links and stainless steel quick release connectors.

Read more
Lecco – Bottom protection

BOTTOM PROTECTION | 2 PIECES

Fitted with two sheets of aluminum alloy and designed to be mounted on the LECCO stretcher.
Facilitates the transport of the wounded over rough terrain in the case to be dragged.
The protection protects the injured from accidental bumps to the back.
It is particularly suitable for river rescue (canyoning).
Read more
Lecco – Visi

PILLOW FITTED WITH A VISOR

Special pillow fitted with a visor made of Lexan®.
The transparent visor easily fits onto the pillow with special pockets.
The pillow keeps the head in a correct position and the visor gives protection from water, snow, ice and stones.
Available only visor # 871.31
Read more
Lecco – Willy

SINGLE WHEEL FOR STRETCHER

The wheel, with low pressure tyre, can be applied to LECCO stretcher into a baricentric position.
Extensible in three hights, it’s a great help for transport on paths.
Read more
Lecco – Handles

HANDLES FOR CARRIAGE WITH WHEELS

4 handles to guide the stretcher when fitted with wheels. They also allow a shoulder carriage by four rescuers.

Read more
Lecco – Twin Willy

WHEELS FOR STRETCHER

Twin wheels for a better stability compared to single wheel. It can be used combined with single wheel WILLY.
The wheel, with low pressure tyre, can be applied to LECCO stretcher into a baricentric position.
Extensible in three hights, it’s a great help for transport on paths.

Read more
VACUUM MATTRESS EVO

VACUUM MATRESS

FOR INJURED IMMOBILIZATION

Vacuum mattress for wounded immobilization.
Its dimensions fit LECCO, 911 Canyon and Kit Everest stretchers, keeping the immobilization of the injured also in vertical position.
There is no interference with X-ray or MRI it is a clear image, the only visible shadow is from the valve, but very distinct that is a round object, the same as if the patients  have a shirt with buttons on. The new Polyester beads stays very clear, even after years of using the splints, not as the old Styrofoam beads collapse (mature) and change of the density fooling the X-ray technician with an image of a fracture.
The temperature ranging  from +150 C to  -70 C  without any problem with the Polyurethane fabric.
It is recommended a maximum load of 200 kg.
The fabrics of the carrying cases is 1000 Denier Michigan Cordura Nylon with 10 mm zipper and reflective tape. The handles and straps are 35 mm Polyester webbing with 35 mm double adjusting multi colored buckles.
Double laminated Polyurethane with a scrim of nylon inside to make it have a maximum penetration, abrasion and rip strength. The bottom material is a heavy 400 denier (0.45 mm) and the inner material is also a double laminated Polyurethane with a thickness of 200 D. (0.35 mm).
Polyurethane materials are very tough and resist Benzene, Paint thinner, Acetone and gasoline, even Chlorine, but if will fade the colors.
All products are tested for a 24 hrs vacuum hold before leaving the factory. It is a life time warranty on all welding seams and the valve plug. One year warranty on the handles and straps. CE Certification and FDA approval in USA.
Repair kit with Polyurethane glue and patches.
Vacuum pump and carriage bag included.

Read more
Disposable bag

CORPSES RECOVERY | WATERPROOF BOTTOM

Sorry to say, but an operational rescue team has to be equipped also with bags for corpses removal.
The special functions requested for this item are so much intricate that this product is arduous to supply.
The KONG’s Disposable Bag is a one-use wrapping, entirely impermeable, made of a double coat devoid of any passing seam: one polyester non-woven layer coupled with a second layer of plastic film.
The zip-fastener, which opens along an “L” line, has two sliders in order to facilitate opening and shutting acts.
The bag measures 2.2 meter by 0.9 and has six handles arranged for an easy carrying by hand.
To note down the relating information, the bag is properly provided by a PVC transparent pocket, including  a label and a pencil.
The bag weights little more than one kilogram and may be charged with

Read more
Everest -Taylan

FASTEN WEBBING SYSTEM FOR X-TRIM BOARD

Fasten webbing system for X-TRIM board.
Easy to adjust, it allows a quick immobilization to the board by connectors.
Available without connectors with velcro strips # 855.023.
855021000KK  855022000KK 855023000KK
Read more
Everest – Patty

HANGING KIT FOR KIT EVEREST

Multiuse hanging kit made of two single pieces.
Each one has five webbings of different color for an easy attachment to the rescue bag.
Light and compact it grants high breaking load resistance.

Read more
Everest – Rescue bag

HELI-RESCUE BAG | CORDURA

Rescue helicopter bag designed to be used either with rescue board either with vacuum mattress.
Designed and tested with all exsisting type of helicopter lifting devices.
Hanging attachment loops are in different colors.
Available on request in other fabric (green/black, mimetic…).
High quality product completely made in Italy.

Read more
Express carriage frame

MODULAR CARRIAGE FRAME | ALU ALLOY

Light and modular frame that can be disassembled for an easy transportation in the special bag (included).
It allows to easy move on terrain the kit Everest and any other spinal board model.
Not for overhanging operations.

Read more
Everest – Head-rest pillow with chin straps

Device for the immobilization of the injured head.
Fitted with cushion with side rails, two plastic padded slings for fixing forehead and chin and two Velcro strips for quick fastening to the spinal boards mod. X-TRIM.

Read more
Everest – carriage rucksack

Comfortable and compact rucksack with handles and resealable shoulder straps, easy to transport by one only rescuer or to lower with a winch.

Read more
Lecco – Orion

Hanging kit for all kind of carriage made of four coloured webbings fitted with to KL connectors aluminium screw gate.

Read more
Lecco – Evolution

DOUBLE HANGING KIT

2 pieces double hanging kit with colored webbings connected to KL connectors alluminium screw gate that grants an easier and quicker positioning of the injured on vertical walls.
Read more
Virgo webbing for vertical descent

WEBBING FOR VERTICAL DESCENT

Heavy load safety webbing for vertical or overhanging descent with big connection eyelets.
Easy to be inserted all around the stretcher frame, it grants hight safety operations.
Length 7,4 m

Read more
Lecco – Gemini

AERIAL ROPEWAY SUSPENSION KIT

Hanging kit for cableway or airway transportation made of five colored webbings fitted with screw gate aluminium connectors.
Designed specifically for Lecco stretcher.

Read more