Descenders

Showing all 8 results

Ortis

SPECIAL FOR EVACUATION

Ortis is a self-locking descender device, manually run by one operator, used for evacuation from cableway, adventure parks and high work places. Conform to EN 341 class A standard, a person can be lowered by an operator on a textile rope at a controlled speed (between 0.5 and 2 m/s).
Fitted with highly resistant aluminum wheel and pigtail lever to manage the speed of descent.
Important: this device has been designed to be used with a Tendon Ø 11mm static rope conform to EN 1891 standard. It may also be used with other 10 to 13 mm Ø static or dynamic ropes but results could differ from EN 341 class A standard requirements.
High quality product, made in Italy!

Read more
Oka

CANYONING DESCENDER | FOR PROGRESSION | FOR RESCUE

New descender especially conceived for canyoning, designed not only for progression on rope but also for the use in emergency, recovery and rescue situations, very difficult to manage with other devices.
The use is quick, safe and effective in every condition.
The comfort of operation, the modularity of progression on ropes with different diameters and the multiplicity of breaking positions are characteristics achieved through joint development with rescue technicians.
Connector suggested: Large Multiuse Auto Block # 7370045V4KK
Available set OKA + Large Multiuse Auto Block connector # 805SET001KK
Supplied with two rubber spare parts.

80508N400KK OKA Black
80508B400KK OKA Blu
805SET001KK OKA SET – anodized descender + Large Multiuse Autoblock Connector
Read more
Full

Innovative belay plate that can be used also as rigging plate.
Fitted with three holes it is certified EN 795/B for 5 people, it can also be used as a brake for rappelling with single or double ropes. It is a very useful device for rescue operations, the natural choice for mountain experts. It allows a cleaner belay point avoiding tricky and cumbersome chains of carabiners and plates. The wide upper hole is able to accomodate two connectors for an higher safety. When used as a descender device, it works with ropes from 8 to 12mm.
High quality product completely developed and manufactured in Italy.
Tested piece by piece.
864N15400KK FULL – Black
864O15400KK FULL – Orange
Read more
Indy Evo

FOR RESCUE MANOUVERS | IT ALLOWS TO TAKE IN SLACK THE ROPE

Indy Evo is a manually operated descender device with double autolocking system, that locks both when the lever is released or when it is pressed. INDY EVO is also a descender device (conform to EN 12841 type C) for working rope and it allows a descent at a controlled speed and stop at any time, hands free, on a static rope (EN 1891) or dynamic rope (EN 892). Light weight and compact size, long life guaranteed by the stainless steel cams and low maintenance make it a working tool very appreciated by the industry.
Certified for two people, it allows the lowering of two people at the same time. It allows to take in slack the rope.
High quality product, made in Italy!
Patented.

801020400KK DESCENDERS – INDY EVO – Indy Evo
80102N400KK DESCENDERS – INDY EVO – Indy Evo Black
Read more
De jump

CANYONING DESCENDER | RELEASABLE UNDER LOAD

Multiuse descender device, the only one in the world which can be opened under load. Multi-purpose device suitable for canyoning, special forces, rescue and military application. As a descender it fits ropes from 5 to 13 mm in diameter. Useful for many other actions as lifting, belaying, rescue etc.
It works with ropes between 9 and 12 mm

Read more
Big 8

FOR BIG DIAMETER ROPES | WITH WINGS | HOT FORGED

Figure ‘8’ descender with wings for create a locking knot. Perfect for belaying the first climber with double ropes.
The large central opening allows you to overcome any knots on the ropes.
It works on ropes from 9 to 16 mm
Available in alu alloy and stainless steel versions.

80506N400KK BIG 8 ALU – anodized black
80506R400KK BIG 8 ALU – anodized red
80506P100KK BIG 8 ALU – polished
Read more
Mini 8 S Steel

STAINLESS STEEL | COMPACT VERSION | HEAVY LOAD

Compact version of figure ‘8’ descender.
Fitted with wings for create a locking knot. Perfect for belaying the first climber with double ropes.
It works on ropes from 9 to 16 mm

Read more
Totem

LONG RAPELLING BRAKE

Friction plate for a modular sliding effect, it allows the passing of connection knots.
Light, compact, easy to fix and simple to use, TOTEM is the best solution for long rapelling.
Connectors not included.
Read more